Services: Electronics prototyping, circuit assembly, documentation
Year: 2021
Client: A composites engineering firm

An engineering firm needed a working trigger circuit for airbag initiator testing. We built the prototype from their schematic, added clear status indication and delivered it with written operating instructions.

The challenge

The client had a schematic. They needed a hand-built, working circuit that an operator could arm and fire safely, with an obvious indication of whether the capacitors were charged.

Hand-built trigger circuit prototype boards with arm switch

What we did

  • Assembled the circuit on prototype boards with an enable (arm) switch and a separate trigger switch.
  • Replaced the planned optocoupler logic with direct LED indicators: orange shows the capacitor is still below 25 V, and green shows the circuit is discharged and safe.
  • Wrote step-by-step operating instructions, including the minimum 25 V supply and the shorting-jumper safety step.

The result

The prototype and its operating instructions were delivered in 2021.

Tools and methods: Hand assembly on prototype board, bench power supply and test equipment

Wired electronics prototype with enable and trigger switches

Have a similar project?

Tell us what you need built, scanned or designed and we will reply with a scope and a quote.