5V 12V 1 2 4 6 8 channel relay module with optocoupler. Relay Output 1 2 4 6 8 way relay module

Electrical parameters:
Supply voltage: 5VDC, 12VDC
Current: more than 100mA
Load: 250V 10A AC or 30V 10A DC

VCC: positive power supply system
GND: System power negative
IN1 – IN2: relay control ports
4-channel relay output modules, relay output contacts 250A 10A. Input IN1, IN2, IN3, IN4, the signal line LOW effective. VCC, GND power input, canrelay a separate power supply relay power input of JD-VCC.

1, support all MCU control.
2, the industrial sector;
3, PLC control;
4, smart home control
6 channel relay module
1. Maximum load on normally open pin: AC 250V/10A, DC 30V/10A.
2. Trigger current 5mA;
3. Power indicator light (green), relay status indicator light (red);

Module interface specifications:
1. DC+ : DC power supply positive pole
2. DC- : DC power supply negative pole
3. CH1~CH6 : : relay signal triggering pin

Relay output:
1. Normally closed pin (NC1~NC6) : relay normally closed pin
2. Common pin (COM1~COM6) : relay common pin
3. Normally opened pin (NO1~NO6) : relay normally opened pin

1 channel relay module
Maximum load: AC 250V/10A, DC 30V/10A
Trigger current: 5mA
Working voltage: 5V/12V
Module size: 50 x 26 x 18.5mm (L x W x H)
Four mounting bolts holes, diameter 3.1mm
DC+: positive power supply (VCC)
DC-: negative power supply (GND)
IN: can be high or low level control relay
NO: normally open relay interface
COM: Common Interface Relays
NC: normally closed relay interface

2 channel relay module
1 Dimensions: 50.5mm (length) * 38.5mm (W) * 18.5 (H)
2 Weight:. 31g
3.PCB Color: Black
4 board four weeks with four screws holes, hole diameter 3.1mm, easy to install and fixed
5.relay of high quality loose music relays SPDT. A common terminal, a normally open, one normally closed terminal
6 optocoupler isolation, good anti-jamming
7 low pull, high release. Energisation status indicator light, release status LED is off
8.VCC of system power, JD_VCC relay power. You can plug in jumpers


8 channel relay module
Using high-current relay , AC250V 10A DC30V 10A
Contact some independent wiring , safe and reliable
Standard interface , can be extended in a variety of development board
With fixed screw holes for easy installation
Suitable for a variety of platforms such as 51/AVR/AVR/ARM


Weight 50 g

12v 1ch, 12v 2ch, 12v 4ch, 12v 8ch, 5v 1ch, 5v 4ch, 5v 8ch


There are no reviews yet.

Be the first to review “WINNIDUINO Relay module with optocupler”

Your email address will not be published. Required fields are marked *

Recently Viewed

WINNIDUINO Relay module with optocupler
12v 1ch
12v 1ch
12v 2ch
12v 2ch
12v 4ch
12v 4ch
12v 8ch
12v 8ch
5v 1ch
5v 1ch
5v 4ch
5v 4ch
5v 8ch
5v 8ch
Add to cart